Questions tagged [ir-spectroscopy]

Use this tag for questions regarding the principles and application of infrared spectroscopy.

What is infrared spectroscopy?

(mainly copied from Wikipedia)

Infrared spectroscopy exploits the fact that molecules absorb frequencies that are characteristic of their structure. These absorptions occur at resonant frequencies, i.e. the frequency of the absorbed radiation matches the vibrational frequency. The energies are affected by the shape of the molecular potential energy surfaces, the masses of the atoms, and the associated vibronic coupling.

3D animation of the symmetric stretching of the C–H bonds of bromomethane

In particular, in the Born–Oppenheimer and harmonic approximations, i.e. when the molecular Hamiltonian corresponding to the electronic ground state can be approximated by a harmonic oscillator in the neighborhood of the equilibrium molecular geometry, the resonant frequencies are associated with the normal modes corresponding to the molecular electronic ground state potential energy surface. The resonant frequencies are also related to the strength of the bond and the mass of the atoms at either end of it. Thus, the frequency of the vibrations are associated with a particular normal mode of motion and a particular bond type.

Number of vibrational modes:

In order for a vibrational mode in a sample to be "IR active", it must be associated with changes in the dipole moment. A permanent dipole is not necessary, as the rule requires only a change in dipole moment. A molecule can vibrate in many ways, and each way is called a vibrational mode. For molecules with $N$ number of atoms, linear molecules have $3N – 5$ degrees of vibrational modes, whereas nonlinear molecules have $3N – 6$ degrees of vibrational modes (also called vibrational degrees of freedom). As an example $\ce{H2O}$, a non-linear molecule, will have $3 × 3 – 6 = 3$ degrees of vibrational freedom, or modes.

Simple diatomic molecules have only one bond and only one vibrational band. If the molecule is symmetrical, e.g. $\ce{N2}$, the band is not observed in the IR spectrum, but only in the Raman spectrum. Asymmetrical diatomic molecules, e.g. $\ce{CO}$, absorb in the IR spectrum. More complex molecules have many bonds, and their vibrational spectra are correspondingly more complex, i.e. big molecules have many peaks in their IR spectra.

The atoms in a $\ce{CH2X2}$ group, commonly found in organic compounds and where X can represent any other atom, can vibrate in nine different ways. Six of these vibrations involve only the $\ce{CH2}$ portion: symmetric and antisymmetric stretching, scissoring, rocking, wagging and twisting, as shown below. Structures that do not have the two additional X groups attached have fewer modes because some modes are defined by specific relationships to those other attached groups. For example, in water, the rocking, wagging, and twisting modes do not exist because these types of motions of the H represent simple rotation of the whole molecule rather than vibrations within it.

Symmetric stretching

Asymmetric stretching

Scissoring

Rocking

Wagging

Twisting

The above figures do not represent the "recoil" of the C atoms, which, though necessarily present to balance the overall movements of the molecule, are much smaller than the movements of the lighter H atoms.

Where do I use this tag?

You will use this tag for questions regarding the principles and application of infrared spectroscopy. Don't use it for questions regarding other spectroscopic techniques. Use appropriate tags for that instead.

I love infrared spectroscopy! Where do I learn more about it?

There are plenty of books, but we'll reference a few from the resources page.

176 questions
23
votes
1 answer

In rovibrational spectra, when exactly is the Q branch forbidden?

I'm aware that the Q branch ($\Delta j = 0$) is usually not observed in rotational-vibrational spectra of diatomic molecules in the gas state, however, I've heard different things about when exactly this transition is forbidden. I've sometimes been…
Ignacio
  • 926
  • 1
  • 8
  • 18
19
votes
2 answers

Why does the weaker C–H bond have a higher wavenumber than the C=O bond?

My understanding is that a stronger bond has a higher wavenumber in IR spectrum. But why does the C–H vibration have a higher wavenumber than the C=O vibration? The latter is a double bond, so I think it should be a stronger bond than the C–H single…
18
votes
5 answers

Is it "common practice in Fourier transform spectroscopy to multiply the measured interferogram by an apodizing function"? If so, why?

The recent paper in Nature Independent confirmation of a methane spike on Mars and a source region east of Gale Crater is interesting and the basis is a reanalysis of 2013 data taken by a X spectrometer about the Mars Express spacecraft in orbit…
uhoh
  • 5,618
  • 3
  • 26
  • 92
14
votes
2 answers

Why does the carbonyl group in an acid anhydride have two stretching frequencies?

The carbonyl stretching frequencies for an acid anhydride are approximately $1820~\mathrm{cm^{-1}}$ and $1760~\mathrm{cm^{-1}}$. These are both higher frequencies than a simple ketone owing to the electron withdrawing capability of the adjacent…
RobChem
  • 9,606
  • 31
  • 78
  • 137
13
votes
4 answers

Why are some molecules unable to absorb infrared radiation?

Methane $\ce{CH4}$ is symmetrical and non polar, and so is oxygen $\ce{O2}$. But $\ce{O2}$ doesn't absorb IR. Why is that? People say that if a molecule can change its polarity then it will absorb IR, but I don't understand how a molecule changes…
13
votes
2 answers

Why do molecules have to have a change in dipole moment in order for them to be IR active?

My chemistry textbook keeps saying that in order for a molecule to be able to absorb infrared radiation, it has to have a change in dipole moment when the bond vibrates. I don't understand why that is. Some clarification would be appreciated.
amiliya
  • 395
  • 2
  • 4
  • 11
11
votes
1 answer

How to determine conformation using IR

In my advisor's Ph.D. research, she used IR spectroscopy to (help) determine the conformation of a compound of interest (its structure is known.) In organic chemistry, I learned about using IR as a way to identify functional groups (and in…
Melanie Shebel
  • 6,434
  • 10
  • 44
  • 83
11
votes
3 answers

Why does the C–C bond have extremely weak absorptions?

My book, Pavia's Introduction to Spectroscopy, tells me this about the infrared spectrum of alkanes: $\ce{C-C}$ : Stretch not interpretatively useful; many weak peaks. This is very interesting. What makes the C–C bond so reluctant to absorb…
11
votes
1 answer

What equipment is used for two-dimensional IR spectroscopy and how can the molecular structure of a compound be resolved?

On the Wikipedia page about two-dimensional IR spectroscopy it is said that 2D IR spectroscopy can be used to study the molecular dynamics with femtosecond time resolution. According to Wikipedia it has for example been used successfully to…
11
votes
2 answers

Is carbon dioxide IR inactive?

Wouldn't CO2 be IR inactive because of its non-polar bonds?
Dissenter
  • 18,229
  • 46
  • 172
  • 332
9
votes
0 answers

Why do asymmetric stretches occur at higher wavenumbers than symmetric stretches?

I learned that the $\ce{N-H}$ bonds in a primary amine lead to two signals the infrared spectra at $\sim \pu{3400 cm^-1}$, one for symmetrical stretching and another for asymmetrical stretching. For example, here is the IR spectrum of butylamine,…
Kurzd
  • 331
  • 3
  • 8
9
votes
1 answer

In infrared spectroscopy, why is there no C=C reading for E alkenes?

For the (E)-2-pentene, there was no C=C reading, about 1600. For the (Z)-2-pentene, there is a C=C. Why is there a reading on the Z but not on the E?
CognisMantis
  • 1,608
  • 3
  • 17
  • 32
9
votes
2 answers

Why are there two infrared vibrational frequencies for the terminal CO ligands of Fe2(CO)9?

I am struggling to rationalise why there are two infrared vibrational frequencies ($\pu{2082 cm^-1}$ and $\pu{2019 cm^-1}$) for the stretching of the terminal $\ce{CO}$ ligands of $\ce{Fe2(CO)9}$. From my understanding of the structure, all six…
9
votes
3 answers

How do I figure out how many hydrogens my compound actually has using a mass and NMR spectrum?

Question 3: It said $m/z = 122,$ and $m/z = 124$ is in a $3:1$ ratio, so I figured that meant that chlorine is present. Then I thought $m/z$ was the actual compound's molecular mass. So I used the rule of 13, and did: Chlorine's molar mass =…
9
votes
1 answer

Dominant contribution of v = 0 → v = 1 transition in vibrational spectroscopy

Recently I had studied vibrational spectroscopy using the quantum harmonic oscillator model. After stating the gross selection rule [that vibrational oscillation demands a change in dipole moment for polar molecule] and showing that transitions are…
1
2 3
11 12